Category
Film Applicator

WET FILM APPLICATORS

ONE SIDED BIRD FILM APPLICATORS SIIN - 3550:

Made of high-grade, corrosion-resistant stainless steel using modern technology of metallurgy with precision grinding machine.

The accuracy of the Gap Depth is ±1.0µm (50µm and below) and or 2% of Full Scale.

The Applicators have a flat edged prismatic body making them suitable for coatings applied to a flat & relatively strong substrate and easy to clean gauges.

 

CONFORMS  TO :ASTM D 823-E, ASTM D 3022

 

Total Width       : 110 mm ,

Wet Film Width : 90 mm

Gap Sizes           : 25 or 50 or 75 or 100 or 150 or 200 or 250 µm.

Special sizes available upon request.

FOUR SIDED BIRD FILM APPLICATORS SIIN – 3560

 

Made of high-grade, corrosion-resistant stainless steel using modern technology of metallurgy with precision grinding machine.

The accuracy of the Gap Depth is ±1.0µm (50µm and below)and or 2% of Full Scale.

To provide four film thicknesses in one gauge, Simply rotate the applicator to the required thickness.

The Applicators have a flat edged prismatic body making them suitable for coatings applied to a flat and relatively strong substrate.

CONFORMS  TO :ASTM D 823

Total Width      : 110 mm ,

Wet Film Width: 90 mm

Gap Sizes          : 30,60,90,120 µm

                           25,50,75,100 µm

                           50,75,100,150 µm

                           100,150,200,250 µm
                           250,500,750,1000 µm

Special sizes available upon request.

EIGHT PATH FILM APPLICATORS SIIN – 3460

Made of high-grade, corrosion-resistant stainless steel using modern technology of metallurgy with precision grinding machine.

To provide eight film thicknesses in one gauge, Simply rotate the applicator to the required thickness.

A small quantity (depending on length and thickness of film required) of the material to be checked is placed on the inside of the channel near the correct opening for the thickness desired.

The applicator is then drawn down over the chart or other surface and a uniform thickness of film is produced for observation and test.

 

Total Width       : 70 mm ,

Wet Film Width  : 60 mm,

Gap Sizes           : 25, 50, 75, 100, 125, 150, 175, 200 µm

                           150, 200, 250, 300, 350, 400, 500, 600  µm

Special sizes available upon request.

CUBE FILM APPLICATOR SIIN – 1103

Made of high-grade, corrosion-resistant stainless steel using modern technology of metallurgy with precision grinding machine.

These small applicators have the benefit of two gaps machined into their working edges. They form very reproducible, parallel sided films, often used when comparing different samples.

Suitable for drying time recorders and also the Minimum Film Forming Temperature Bar.

 

Total Width:25 mm, Film Width:16 mm, Gap Sizes: 37 / 75 µm.

Total Width:50 mm, Film Width:41 mm, Gap Sizes: 50 /100 µm.

 

Special sizes available upon request.

SAG TESTER (APPLICATOR) SIIN - 4207

Made of high-grade, corrosion-resistant stainless steel using modern technology of metallurgy with precision grinding machine.

The straight scraper has 10 notches of increasing clearance.

The Sag Tester is used to establish a coating’s resistance to sag due to gravity.

A contrast chart is immediately placed in a vertical position with the thinnest film at the top.

The thickness at which the stripes join indicates the tendency to sag.

 

CONFORMS  TO : ASTM D 4400

 

Total Width: 110 mm , Film Width : 90mm

Standard Range: 75,100,125,150,175,200,225,250 & 275 & 300 µm

CONFORMS  TO : ASTM D 4400,ASTM D 3730-78

Total Width : 170 mm , Film Width : 150 mm

Low Range :        25,38,63,75,88,100,113,125,138 & 150 µm

 or

Medium Range : 100,150,200,250,300,350,400,450,500 & 600 µm or

High Range :  350,400,450,500,625,750,875,1000,1250 & 1500 µm

SPIRAL WIRE BAR COATER SIIN – 4360/4361

The wire and its rod are made of stainless steel, which are corrosion-resistance.

The coaters are used to apply a predetermined thickness for coatings with high levelling characteristics.

A coating (Paint or Ink) is being drawdown by a known thickness wire-rod applicator over a substrate (e.g. Black/White Test Chart, Glass or Wood Panel, etc.).

The motion of the drawdown is done by gripping the 2 edges of the applicator or by using the Holder.

Wet Film Deposit: 4 or 6 or 12or 24or 40 or 50 or 60 or 80 or 100 or 120 µm

 

Total Width: 22 Cms. Film Width: 16 cms. (Rod Dia 7 mm)

Total Width: 28 cms. Film Width: 34 cms. (Rod Dia 12 mm)

Impression Bed Available (Optional).

Special sizes available upon request.   

Micrometer Adjustable Film Applicator SIIN – 3570

Made of anodised aluminium and Stainless steel knife blade with precision ground edge.

The operator sets the blade clearance by adjusting the micrometers.

Suitable for high-precision manual application of high viscosity fluids onto relatively firm substrates.

Wet film thickness 10 mm maximum

Micrometer head accuracy is  +10um

Standard Film Widths: 150, 200, 250, 300 mm    

Conforms To: ASTM D283

Special sizes available upon request.

 

Know Us
  
Download
Film Applicators List
Quick Enquiry
Name  :
Email   :
Company  :
Phone  :
Message  :
Verification Code   :

Enter verification code   :
 
Contact Us
Samriddhi International Inc.
405, New Sonal Ind Est.,
Building No.2, Link Road,
Near BMW Showroom,
Kach Pada, Malad (W),
Mumbai 400 064
India
T : +91 22 4004 5104
E : info@samriddhiint.com,
     info@sbstesting.com