Category
Hydraulic Adhesion Tester
Hydraulic Adhesion Tester The Hydraulic Adhesion Tester is one of the most accurate and versatile adhesion testers currently available. It measures the adhesion bond strength of applied coatings with ease, and precision.
The adhesion is measured by the tensile pull on a Dolly glued to the coating surface. The force is applied through the centre of the Dolly by a hydraulically loaded pin. This ensures an exactly central point-loading of the force.
Adhesion values are recorded by a pressure gauge giving a 1:1 pressure reading. This is made possible as the net surface area of the Dolly is equal to the surface area of the hydraulic piston bore. Pressure reacted by the Dolly is the same as the pressure in the bore and is transmitted directly to the pressure gauge. The maximum value achieved at pull-off is recorded by a reset needle that is easily read on the large scale of the pressure gauge.
Connection to the stainless steel Dolly is easily made with a snap-on connector. The pressure gauge is swivel-mounted allowing testing in any position. This is significant as coating breakdown invariably starts at positions that were difficult to reach during surface preparation and application.
The Adhesion Tester can test both external and internal surfaces of pipes. Because the load reacts internally within the Dolly, curved surfaces of pipes can be easily tested. To obtain a uniform tensile load, curved Dollies machined to match the diameter under test need to be used. External diameters as small as 25mm (1") and internal diameters as small as 150mm (6") can be tested.
Ensures effective quality control with a non-destructive capability. To allow the specification minimum to be proven, the Dolly can be removed using the heated Dolly remover supplied. If necessary, the Dolly can be left in place for testing during service as part of a planned maintenance program.
Calibration Certificate with traceability to UKAS (for the Adhesion Tester) and PAT Certificate (for the Heated Dolly Remover) are an optional extra. The Certificate is supplied in a paper format and is available online through the Calibration Portal (under Browse Categories) on this website. The Calibration Portal will list all your equipment that is calibrated by Paint Test Equipment, showing the renewal dates and allowing Calibration Certificates to be viewed at any time.
Supplied in a Industrial Foam-Filled Carrying Case with 5 Flat Dollies, Adhesive and Heated Dolly Remover, Dolly Cleaning Tool and Dolly Plug.

Complies with International Standards
ISO 16276-1 ASTM D 4541
ISO 4624 NF T30-606

Hydraulic Adhesion Tester Specifications:-

Part No Head Type Operating
Range PSI
Operating
Range MPa
Accuracy Cal Cert
Part No
PAT Cert
Part No
X1003 Standard 0-2600 0-18 ±1%FSD NX001 NXP01
X1004 Right Angle 0-2600 0-18 ±1%FSD NX001 NXP01


Hydraulic Adhesion Tester Accessories:-

Part No Product Pipe Size Metric Pipe Size Imperial Use with HATE Model Information
XA201 Concave Dolly 51mm 2" X1003 / X1004 For external pipe testing. Select the closest sized dolly for your diameter of pipe.
XA202 Concave Dolly 76mm 3" X1003 / X1004
XA203 Concave Dolly 102mm 4" X1003 / X1004
XA204 Concave Dolly 152mm 6" X1003 / X1004
XA205 Concave Dolly 203mm 8" X1003 / X1004
XA206 Concave Dolly 254mm 10" X1003 / X1004
XA207 Concave Dolly 305mm 12" X1003 / X1004
XA208 Concave Dolly 356mm 14" X1003 / X1004
XA209 Concave Dolly 406mm 16" X1003 / X1004
XA210 Concave Dolly 457mm 18" X1003 / X1004
XA211 Concave Dolly 508mm 20" X1003 / X1004
XA212 Concave Dolly 610mm 24" X1003 / X1004
XA213 Concave Dolly 762mm 30" X1003 / X1004
XA214 Concave Dolly 914mm 36" X1003 / X1004
XA215 Convex Dolly 152mm 6" X1004 For internal pipe testing. Select the closest sized dolly for your diameter of pipe.
XA216 Convex Dolly 203mm 8" X1004
XA217 Convex Dolly 254mm 10" X1004
XA218 Convex Dolly 305mm 12" X1004
XA219 Convex Dolly 356mm 14" X1004
XA220 Convex Dolly 406mm 16" X1004
XA221 Convex Dolly 457mm 18" X1004
XA222 Convex Dolly 508mm 20" X1003 / X1004
XA223 Convex Dolly 610mm 24" X1003 / X1004
XA224 Convex Dolly 762mm 30" X1003 / X1004
XA225 Convex Dolly 914mm 36" X1003 / X1004
XS101 Flat Dolly     X1003 / X1004 For flat substrate testing.
XS102 Spare Adhesive       For bonding the Dolly to the coating.
XS103 Dolly Plug       Use in Dolly when applying Adhesive.

 

Know Us
  
Download
Adhesion List
Quick Enquiry
Name  :
Email   :
Company  :
Phone  :
Message  :
 
Contact Us
Samriddhi International Inc.
405, New Sonal Ind Est.,
Building No.2, Link Road,
Near BMW Showroom,
Kach Pada, Malad (W),
Mumbai 400 064
India
T : +91 22 4004 5104
E : info@samriddhiint.com,
     info@sbstesting.com